当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM E2542-2008 人员净化室用便携式热水器的标准规范
ASTM E2542-2008 人员净化室用便携式热水器的标准规范
世界资料网 / 2021-04-12
【英文标准名称】: Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
【原文标准名称】: 人员净化室用便携式热水器的标准规范
【标准号】: ASTM E2542-2008
【标准状态】: 现行
【国别】:
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: E54.03
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】: 事故预防;净化;炊事机具;厨房器具;人员;便携的;热水器
【英文主题词】: decontamination; shower; warm water
【摘要】: The use of these acceptance tests will insure that organizations buying portable heaters will be assured the heaters meet certain performance requirements. 1.1 This specification is used to standardize the portable water heaters used on personnel decontamination lines to insure the heaters provide sufficient heated water for as long as they are needed during the emergency. Note 18212;These heaters are not intended to be used for the decontamination for any other surface or material. Also, these heaters are intended to be portable and easy to use by first responders during a chemical, biological, radiological, nuclear, and explosive (CBRNE) event. 1.2 This specification contains a specification section and a test methods section so users need to refer to the section applicable to their needs when using this standard specification. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Note 28212;The U.S. first responder personnel using the equipment manufactured under this standard are not likely to be familiar with SI units so English units need to be included as part of the system documentation and shown on control panels for any equipment sold to U.S. organizations. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 11.1 These test methods shall be used to insure portable water heaters comply with the requirements of this specification.
【中国标准分类号】: Q83
【国际标准分类号】: 97_040_50
【页数】: 3P.;A4
【正文语种】:

关键字: ASTM E2542-

相关资料

ASTM E2542-2008 人员净化室用便携式热水器的标准规范
ASTM E2542-2008 人员净化室用便携式热水器的标准规范
ASTM D5425-2008 电工产品火灾危险评估标准的制定的标准指南
ASTM D6392-2008 热溶法测定非增强土工薄膜接缝完整性搭标准试验方法
ASTM C534/C534M-2008 片状和管状预制韧性弹性的蜂窝状绝热材料的标准规范
ASTM C1631-2008 聚丙烯泡沫绝热的标准规范
ASTM C450-2008 公称尺寸的管件、容器隔热层用绝热配件覆盖物生产的标准实施规范
ASTM D3034-2008 PSM型聚氯乙烯(PVC)污水管和配件的标准规范
ASTM A1056-2008 用于连接无毂铸铁污水管道和管配件的铸铁接头的标准规范
ASTM C1338-2008 测量隔热材料和饰面耐霉性的标准试验方法
ASTM E1014-2008 室外A加权声级测量标准指南
ASTM C636/C636M-2008 吸音砖和衬板用金属吊顶系统安装的标准实施规程
ASTM F628-2008 有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道标准规范.表40
ASTM C1676-2008 微孔绝热标准规范
ASTM F1908-2008 住宅室外游泳池、热水浴缸和水疗设施用栅栏的标准指南
ASTM E2484-2008 多层建筑外部疏散缓降器的标准规范
ASTM C1409-2008 测量和估算绝缘管及元件数量的标准指南
ASTM C419-2008 胶泥绝热涂层的试样制作与养护的标准实施规程
ASTM F1804-2008 沿路安装过程聚乙烯(PE)煤气管的许可拉伸载荷测定用规程
ASTM C421-2008 预制块型和预制包覆管道隔热材料翻滚时易碎性的试验方法
ASTM D6513-2008 计算标准耐火试验用木框架墙超强荷载的标准实施规程
ASTM C1258-2008 隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
ASTM D4070-2008 混凝土结构用预制弹性桥梁压缩填缝料安装用粘结剂的标准规范
ASTM D5050-2008 石灰窑尘埃和硅酸盐水泥窑尘埃的商用标准指南
ASTM D3019-2008 用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范
ASTM A762/A762M-2008 下水道和排水沟用预涂聚合物波纹钢管的标准规范
ASTM C390-2008e1 批量预制的隔热材料的抽样和验收的标准实施规程
ASTM C991-2008e1 金属建筑物用挠性玻璃纤维绝缘材料标准规范
ASTM E2067-2008 完全氧燃烧热量测量火灾试验的标准实施规程
ASTM F2562/F2562M-2008 非压力排水和排污用增强钢热塑加肋管及其配件的标准规范
ASTM E2451-2008 从火灾残留碎片样本中保存可燃液体和可燃液体残留提取物的标准实施规程
ASTM F679-2008 大直径聚氯乙烯(PVC)塑料重力污水管和配件的标准规范

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: