当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法
ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法
世界资料网 / 2021-04-15
【英文标准名称】: Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
【原文标准名称】: 原子吸收分光光度法对水中钠含量的标准试验方法
【标准号】: ASTM D4191-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D19.05
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: analysis; atomic absorption; sodium; water; Total recoverable elements (in water); Atomic absorption spectrophotometry/spectroscopy; Inorganic compounds--water; Sodium content--water; Spectrophotometry--atomic absorption (water/wastewater)
【摘要】: Sodium salts are very soluble, and sodium leached from soil and rocks tends to remain in solution. Water with a high ratio of sodium to calcium is deleterious to soil structure. Sodium is not particularly significant in potable water except for those persons having an abnormal sodium metabolism, but water supplies in some areas contain sufficient sodium to be a factor in the planning of sodium-free diets. The use of sodium salts is common in industry; therefore, many industrial wastewaters contain significant quantities of sodium. For high-pressure boiler feed-water even trace amounts of sodium are of concern.1.1 This test method covers the determination of low amounts of sodium in waters having low solids content. The applicable range of this test method is from 0.20 to 3.0 mg/L when using the 589.6-nm resonance line. This range may be extended upward by dilution of an appropriate aliquot of sample or by use of the less-sensitive 330.2-nm resonance line (see Test Method D 3561). Many workers have found that this test method is reliable for sodium levels to 0.005 mg/L, but use of this test method at this low level is dependent on the configuration of the aspirator and nebulizer system available in the atomic absorption spectrophotometer as well as the experience and skill of the analyst. The precision and bias data presented are insufficient to justify use of this test method in the 0.005 to 0.20-mg/L range. 1.2 This test method has been used successfully with spiked reagent water. It is the analyst''s responsibility to assure the validity of the test method to other low dissolved solids matrices. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: Z16
【国际标准分类号】: 13_060_50
【页数】: 4P.;A4
【正文语种】: 英语

关键字: ASTM D4191-

相关资料

ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法
ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法
ASTM D4192-2008 原子吸收分光光度法对水中钾含量的标准试验方法
ASTM D6301-2008 在生产用水中悬浮固体和离子固体线上复合样品采集的标准实施规程
ASTM D2331-2008 水沉积物的制备和初步试验的标准实施规程
ASTM D2332-2008 用波长色散X射线荧光法作水沉积物分析标准实施规程
ASTM D3875-2008 微咸水、海水和盐水中碱性的试验方法
ASTM D4981-2008 在废弃物中筛选氧化剂的标准试验方法
ASTM D3859-2008 水中硒含量的标准试验方法
ASTM D1429-2008 水和盐水的比重的标准试验方法
ASTM D3352-2008a 微咸水、海水和盐水中锶离子含量的标准试验方法
ASTM D3558-2008 水中钴含量的标准试验方法
ASTM D4130-2008 微咸水、海水和盐水中硫酸盐离子的标准试验方法
ASTM D2777-2008e1 D19水委员会应用试验方法的精确性及偏差测定的标准实施规范
ASTM D1253-2008 水中残余氯的标准试验方法
ASTM C1308-2008 固化废料中扩散释放物加速浸出试验,模型扩散的计算机程序和从圆柱形废料状态中分离淋滤的标准试验方法
ASTM D3686-2008 用收集有机化合物蒸气进行大气取样的标准方法
ASTM D1735-2008 用水雾仪进行涂层耐水性试验的标准实施规程
ASTM D6039/D6039M-2008 敞口和有盖的木板箱标准规范
ASTM F1252-2008 测量透明材料光反射率的试验方法
ASTM E458-2008 烧蚀的热标准试验方法
ASTM E2605-2008 接收性能标准规范
ASTM D610-2008 涂漆钢表面锈蚀程度评价的试验方法
ASTM F852-2008 消费者用便携式汽油容器的标准规范
ASTM F2714-2008 用荧光衰减法进行包装中顶空氧气分析的标准试验方法
ASTM F2688-2008 系统为基础、以客户为中心的制造质量计划的标准指南
ASTM E341-2008 用能量平衡法测量等离子体电弧气体焓的标准实施规程
ASTM E457-2008 用热容量(芯棒)热量计测量传热速率的标准试验方法
ASTM D7386-2008 单一包裹运输系统的包装性能测试的标准实施规程
ASTM E2070-2008 用等温法的差示扫描量热法测定动力系数的标准试验
ASTM E29-2008 使用试验数据中重要数字以确定对规范的适应性
ASTM D6132-2008 用超声波仪表对外施的有机涂层的干膜厚度进行无损测量的标准试验方法

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: