当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE J639 Safety Standards for Motor Vehicle Refrigerant Vapor Compressions Systems
SAE J639 Safety Standards for Motor Vehicle Refrigerant Vapor Compressions Systems
世界资料网 / 2018-06-22
Product Code:SAE J639
Title:Safety Standards for Motor Vehicle Refrigerant Vapor Compressions Systems
Issuing Committee:Interior Climate Control Committee
Scope:This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks and commercial vehicles (on and off road) that use automotive type mobile air conditioning [MAC] systems. Large trucks, buses and other vehicles that do not use typical automotive a/c systems or use refrigerants not listed in this document are not covered by this standard. This standard covers any vehicle with a MAC system using a belt or electric motor driven compressor.This document provides standards for design, assembly, test and service of MAC systems to minimize environmental, health and safety impacts. Also included are cautionary statements for the service industry to alert technicians to the inadvisability and possible health or safety effects associated with venting refrigerant during service. It is not intended to restrict the use, or further development, of other types of refrigeration systems for mobile air conditioning applications. This document may be amended or additional safety standards created should other systems become practical. This document addresses only HFC-134a (R-134a), carbon dioxide (R-744), and HFO-1234yf (R-1234yf) refrigerants. To prevent system contamination all refrigerants used in mobile air conditioning vapor compression systems require unique service fittings and service equipment. The unique service fittings are intended to eliminate the potential for system refrigerant cross-contamination during service activity. CFC-12 (R-12) is no longer in use in new MAC systems. The service fitting description is maintained as a reference for older vehicles still in use. When retrofitting an R-12 system to use R-134a or when removing R-12 (vehicle disposal) use service equipment designed for R-12 and certified to meet the requirements of SAE J1990 (R-12 recovery and recycle equipment).HFC-152a is an A2 flammable refrigerant as classified by ASHRAE 34 and should be used only with a secondary loop application. However, until MAC systems are developed to use R-152a (HFC-152a), no SAE Standards for system design, service equipment or service procedures have been established. The R-152a service fittings described within this Standard were established as part of the industries evaluation of replacement refrigerants and are maintained for future design guidance and to prevent potential refrigerant cross contamination.
关键字: SAE J639 S

相关资料

SAE J639 Safety Standards for Motor Vehicle Refrigerant Vapor Compressions Systems
SAE J639 Safety Standards for Motor Vehicle Refrigerant Vapor Compressions Systems
SAE MS1006 Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutc
SAE CPGM1 J1349 Certified Power Engine Data for GM LCV as used in 2013MY Chevrolet Malibu - Level 1
SAE CPGM2 J1349 Certified Power Engine Data for GM LCV as used in 2013MY Chevrolet Malibu - Level 2
SAE AS6214 AS5174- FITTING, UNION AND REDUCER, FLARED, 37 DEGREE SPHERICAL
SAE AS6213 FITTING, ADAPTER, BULKHEAD, FLARED TO HOSE, 37 DEGREE SPHERICAL
SAE AS6215 FITTING, BUSHING, PORT, REDUCER, 37掳 SPHERICAL
SAE J444 Cast Shot and Grit Size Specifications for Peening and Cleaning
SAE J243 Methods of Tests for Automotive-Type Sealers, Adhesives, and Deadeners
SAE J1524 Method of Viscosity Test for Automotive Type Adhesives, Sealers, and Deadeners
SAE J1862 Fuel Injection System Fuel Pressure Regulator and Pressure Damper
SAE J1291 Automotive Hydraulic Brake System - Metric Banjo Bolt Connections (STABILIZED Dec 2011)
SAE J200 Classification System for Rubber Materials
SAE J2975 Measurement of Copper and Other Elements in Brake Friction Materials
SAE J743 Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom (Cancelled Dec 2011)
SAE J2894/1 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2863 Automotive Trailer Tow Connector
SAE J1650 Seamless Copper-Nickel 90-10 Tubing (STABILIZED Dec 2011)
SAE USCAR18-3 FAKRA SMB RF CONNECTOR SUPPLEMENT
SAE USCAR17-3 Performance Specification for Automotive RF Connector Systems
SAE J1647 Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity
SAE J2912 Performance Requirements for R-134a and R-1234yf Refrigerant Diagnostic Identifiers for Use with Mobile Air Co
SAE J2927 R-1234yf Refrigerant Identifier Installed in Recovery and Recycling Equipment for Use With Mobile A/C Systems
SAE J1930DA J1930 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spre
SAE J537 Storage Batteries
SAE J2951 Drive Quality Evaluation for Chassis Dynamometer Testing
SAE CPKW1 J1995 Certified Power Engine Data for Kawasaki FX850 as used in 2011 General Purpose Engines - Level 1
SAE CPKW2 J1995 Certified Power Engine Data for Kawasaki FX850 as used in 2011 General Purpose Engines - Level 2
SAE J1153 Hydraulic Master Cylinders for Motor Vehicle Brakes-Test Procedure
SAE J365 Method of Testing Resistance to Scuffing of Trim Materials
SAE J1154 Hydraulic Master Cylinders for Motor Vehicle Brakes-Performance Requirements

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: