当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE ARP461 Synchros
SAE ARP461 Synchros
世界资料网 / 2020-03-30
Product Code:SAE ARP461
Title:Synchros
Issuing Committee:A-4 Aircraft Instruments Committee
Scope:In order to ease the equipment design engineer's problem and at the same time provide a basis for comparing measurements by manufacturer and user this recommended practice sets up standard test procedures for acceptance testing. These conditions and the basic tests to which the characteristics refer are grouped in Section 2 and compose a complete list of defining characteristics of the synchro. Specifications written around synchros have specified certain necessary characteristics for production acceptance testing, such as null voltage and accuracy, under test conditions and techniques that are mainly and properly concerned with accuracy and the shortest possible test time. These characteristics are inherently degraded when the synchro is operating for a period of time at other than room temperature. In synchros this degradation is a factor of high importance
关键字: SAE ARP4

相关资料

SAE ARP461 Synchros
SAE ARP461 Synchros
SAE ARP716 Gap Settings for Aircraft Piston Engine Spark Plugs
SAE AS429 Rate of Climb (Vertical Speed) Indicator, Pressure Actuated (Turbine Powered Subsonic Aircraft) (NONCURRENT No
SAE AS432 Tachometer Instruments (Indicator and Generator)
SAE AS756 Fitting End Assembly, Universal, Design Standard
SAE AS758 Fittings - Installation in Straight Threaded Boss
SAE AMS2350 Standards and Test Methods (Cancelled Oct 1989)
SAE AMS3653 Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluroethylene (Ptfe)
SAE AMS7471 Bolts And Screws, Corrosion And Heat Resistant Nickel Alloy Upsetheaded, Heat Treated, Roll Threaded (Cancel
SAE AMS5708 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire Forgings, and Rings, 58Ni - 19.5Cr - 13.5Co - 4.3Mo -
SAE AMS2473 Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
SAE AIR784 Interrelation of Engine Design and Burner Configuration with Selection and Performance of Electrical Ignition
SAE AIR737 Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports
SAE AMS2310 Qualification Sampling and Testing of Steels for Transverse Tensile Properties
SAE AMS2465 Disilicide Diffusion Coating of Molybdenum and Molybdenum Alloys, Pack Cementation Method (NONCURRENT)
SAE AMS2815 Identification Welding Wire, Line Code System (Cancelled Oct 2001)
SAE AMS5223 Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated, Cold Rolled, 10% Redu
SAE AMS5221 Iron-Nickel Alloy Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated
SAE AMS5225 Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated, Cold Rolled, 50% Redu
SAE AMS5328 Steel Castings, Investment, 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified), Annealed
SAE AMS5330 Steel Castings, Investment, 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340 Modified), Annealed (NONCURRENT
SAE AMS5342 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Soluti
SAE AMS5349 Steel, Corrosion-Resistant, Investment Castings, 13Cr, Free Machining; Hardened and Tempered
SAE AMS5592 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 44Fe - 18.5Cr - 35Ni - 1.15Si, Sol
SAE AMS5593 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W
SAE AMS7236 Rivets, Alloy Corrosion and Heat Resistant, 52co 20cr 10ni 15w, Solution Heat Treated (Cancelled Oct 1990, S
SAE AMS7728 Iron-Nickel-Cobalt Alloy, Sheet, Strip, and Plate, 53Fe - 29Ni - 17Co, Low Expansion Glass Sealing, Annealed
SAE ARP597 Wheels and Brakes, Supplementary Criteria for Design Endurance, Civil Transport Aircraft
SAE AMS3607 Plastic Sheet, Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS5343 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Solutio
SAE AMS5503 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr (SAE 51430) Annealed

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: