当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE ARP5921 Vapor Phase Coking

资料类别

下载排行

SAE ARP5921 Vapor Phase Coking
世界资料网 / 2022-08-17
Product Code:SAE ARP5921
Title:Vapor Phase Coking
Issuing Committee:E-34 Propulsion Lubricants Committee
Scope:
Rationale:
关键字： SAE ARP5

下载

[进入下载页面]

相关资料

SAE ARP5921 Vapor Phase Coking
SAE ARP5921 Vapor Phase Coking
SAE AMS4534 Copper-Beryllium Alloy, Bars and Rods 98cu 1.9be Solution Heat Treated, Cold Worked, and Precipitation Heat
SAE AMS4050 Aluminum Alloy, Plate, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451), Solution Heat Treated, Stress Relieved,
SAE ARP4925 Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems
SAE AMS4633 Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90cu 7.0al 1.8si Drawn and Stress Relieved (Hr50)
SAE AMS4614 Brass Forgings, Free Cutting 60cu 2.0pb 37.5zn as Forged (M10)
SAE AMS4602 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (Ho4)
SAE AMS4520 Leaded Phosphor Bronze Strip 88.5cu 4.0sn 4.0pb 3.0zn 0.26p Cold Rolled, Half Hard (Ho2)
SAE AMS5112 Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00c Cold Drawn
SAE AMS7301 Steel, Highly-Stressed Springs 0.95cr 0.2v (0.48-0.53c) (SAE 6150) Case Hardened
SAE AMS4535 Copper-Beryllium Alloy, Mechanical Tubing 98cu 1.9be Solution and Precipitation Heat Treated (Tf00, Formerly
SAE AMS4533 Copper-Beryllium Alloy, Bars and Rods 98cu 1.9be Solution and Precipitation Heat Treated (Tf00, Formerly At)
SAE AMS2259 Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS5042 Steel, Sheet and Strip 0.15 Carbon, Maximum Forming Grade
SAE AMS4068 Aluminum Alloy, Drawn Seamless Tubing 6.3cu 0.30mn 0.18zr 0.10v 0.06ti (2219-T3511) Solution Heat Treated an
SAE AMS6450 Steel, Spring Wire and Springs 0.95cr 0.22v (0.48 - 0.53c) (SAE 6150) Annealed and Cold Drawn
SAE AMS6359 Steel Sheet, Strip, and Plate 0.80cr 1.8ni 0.25mo (0.38-0.43c) (SAE 4340)
SAE AS3257 Clamp, Loop-Cushioned, Cres, High Temp., .204 Hole
SAE AS7110/8 Nadcap Requirements for Diffusion Welding
SAE AS7110/9 Nadcap Requirements for Percussion Stud Welding
SAE AS7110 Nadcap Requirements for Welding/Brazing
ANSI O5.1-2002 木杆.规范和尺寸
ANSI/NFPA 17-2002 干粉灭火装置
ANSI/ANS 56.8-2002 核反应堆.安全壳系统泄漏测试要求
ANSI/ICEA S-84-608-2002 聚烯烃绝缘填充铜导线通信电缆的技术要求
ANSI/ICEA S-85-625-2002 空芯聚烯烃绝缘铜导体通信电缆的技术要求
ANSI/ICEA S-90-661-2002 通信配线系统中使用的独立无屏蔽室内绞线对电缆.技术要求
ANSI/IEEE 1585-2002 电压波动补偿用中等电压(1-35kV)系列电子设备的功能规范指南
ANSI C79.1-2002 玻璃灯泡名词术语.电灯玻璃灯泡
ANSI C37.32-2002 高压空气断路开关、断路器开关、错误初始开关、接地开关、总线支架和附件控制电压范围.优选额定值、制造指南和规范一览表
ANSI C29.17-2001 合成线柱型绝缘子

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录，共 1 页。 第一页 上一页 下一页 最末页
用户名： 匿名用户
E-mail：
评价等级：
评论内容：
免责条款 - 隐私保护 - 联系我们 - 公司简介 - 批发方案 - 配送方式 - 支付方式 - 法律顾问：北京贾忠强律师