当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE AIR5892 Nonvolatile Exhaust Particle Measurement Techniques
SAE AIR5892 Nonvolatile Exhaust Particle Measurement Techniques
世界资料网 / 2021-03-06
Product Code:SAE AIR5892
Title:Nonvolatile Exhaust Particle Measurement Techniques
Issuing Committee:E-31 Aircraft Exhaust Emissions Measurement Committee
Scope:This SAE Aerospace Information Report (AIR) addresses procedures applicable to quantifying the emission of nonvolatile particulate matter at the exit plane of aircraft gas turbine engines. While both volatile and nonvolatile particulate matter (PM) are present in aircraft gas turbine exhaust, the methods used to measure nonvolatile particles are farther advanced and are addressed here.Existing PM measurement regulations employ the SAE Smoke Number measurement (Reference 2.1.1), a stained filter technique used in evaluating visible emissions. The environmental and human health issues associated with submicronic PM emissions require more detailed measurement of the mass, size, and quantity of these particle emissions.Responding to regulatory agency requests, this AIR describes measurement techniques that are well developed and could be applied to the measurement of aircraft engine particulate matter. The techniques discussed here are considered relevant for measuring particle parameters identified with environmental and health concerns. The discussion that follows is based on research made while developing measurement techniques and in scientific and engineering experiments regarding PM emissions. The techniques are not yet used in routine aircraft engine certification. Future use in regulatory testing is likely to involve further refinements in methodology and application. It is planned that these refinements will be included in the subsequent publication of an Aerospace Recommended Practice.The distinction between nonvolatile and volatile particle types is a critical task in the measurement of particles in aircraft engine exhaust. Appendix A, SAE E-31 Position Paper on Particle Matter Measurements, provides additional technical bases for the scope of this AIR. The measurement methods for volatile condensed particles in turbine exhaust will be covered in a subsequent report. Observations to date show that volatile particles occur mainly at diameters less than 10 nanometers (
关键字: SAE AIR5

相关资料

SAE AIR5892 Nonvolatile Exhaust Particle Measurement Techniques
SAE AIR5892 Nonvolatile Exhaust Particle Measurement Techniques
SAE AS20708/139 Synchro Control Transmitter, Type 31cx6a
SAE AS20708/39 Synchro, Control Transformer, Type 19ctb4b
SAE AS20708/25 Synchro, Control Transformer, Type 16ctb4b
SAE AS20708/68 Synchro, Torque Differential Transmitter, Type 31tdx6c
SAE AS20708/94 Synchro, 60 and 400 Hz, Size 23
SAE AS25065 Ferrule, Flexible Conduit, Radio Frequency Shielding
SAE AS25067 Conduit Assembly, Flexible, Radio Frequency Shielding
SAE AS25427 Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect
SAE AS33401 Bulkhead Bracket for Use With Ms3367 Plastic Tiedown Straps
SAE AS33391 Plate, Mounting, Plastic for Use With Ms3367 Plastic Tiedown Straps
SAE AS33411 Bracket, Mounting, Plastic for Use With Ms3367 Plastic Tiedown Straps
SAE AS5537 Weather Support to Deicing Decision Making (Wsddm) Winter Weather Nowcasting System
SAE AS81582/2 Connector, Plug, Electric, Bayonet Coupling, Lanyard Release, Rfi Shielded, Crimp-Type Contacts, Class E
SAE AS81582/9 Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, Caps, Protective
SAE AS81824/5 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant, Kit, Shielded Cable,
SAE AS81824/4 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant, Splice, Shield, Solde
SAE AS81822/4 Wire, Electrical, Solderless Wrap, Polyimide Coating Over Extruded Polytetrafluoroethylene (Ptfe) Insulati
SAE AS81822/15 Wire, Electrical, Solderless Wrap, Extruded Ethylene-Chlorotrifluoroethylene (Ectfe) Insulation, Silver C
SAE AS81822/8 Wire, Electrical, Solderless Wrap, Polyimide Jacket Over Extruded Fluorinated Ethylene Propylene (Fep) Ins
SAE AS81822/7 Wire, Electrical, Solderless Wrap, Polyimide Jacket Over Extruded Polyvinyl Chloride (Pve) Insulation, Tin
SAE AS81822/12 Wire, Electrical, Solderless Wrap, Uninsulated, Tin Coated Solid Conductor
SAE AS81822/13 Wire, Electrical, Solderless Wrap, Extruded Ethylene-Tetrafluoroethylene (Etfe) Insulation, Silver Coated
SAE AS81822/10 Wire, Electrical, Solderless Wrap, Unisulated, Silver Coated Solid Conductor
SAE AS85049/11 Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Category 1a (For Mi
SAE AS85049/4 Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Up, Category 1a (For Mil-C-229
SAE AS85049/80 Connector Accessories, Electrical, Dummy Contact, Size 12 and 8, Category 7 (Mil-C-38999 Connectors)
SAE AS85080/2 Insulation Sleeving, Electrical, Nonheat Shrink, Silicone Rubber, Flexible
SAE AS85080/1 Insulation Sleeving, Electrical, Shrinkable Without Heat, Polyvinyl Chloride, Flexible Non-Crosslinked
SAE AS85080 Insulation Sleeving, Electrical, Shrinkable Without Heat, General Specification For
SAE AS85080/4 Insulation Sleeving, Electrical, Shrinkable Without Heat, Chlorosulfonated Polyethylene Flexible

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: